Paper-related settings
Select this setting item from Device settings on Various settings.
-
Det. paper setting mismatch
If you select Yes, the printer detects whether the paper size and the media type are the same as those registered. If printing starts with the settings that do not match, an error message appears on the LCD.
-
Advanced paper settings
Perform the following settings for each media type.
-
Paper Thickness (Head Height)
-
Transport unit vacuum settings
-
Extension for borderless printing
-
Pause between scans
-
Pause between pages
-
Detect paper width
Selecting Reset paper settings by paper, Yes and pressing the OK button initializes the settings.
Entering the administrator password is required if it is enabled.
-
-
Top feed paper settings
Set the paper size and the media type of paper loaded in the top feed.
-
Manual feed tray paper settings
Set the paper size and the media type of paper loaded in the manual feed tray.
-
Print advanced paper settings
Selecting Yes and pressing the OK button prints out each setting specified in Advanced paper settings.
-
Reset paper settings for all paper
Selecting Yes and pressing the OK button initializes each setting specified in Advanced paper settings.
Entering the administrator password is required if it is enabled.